“Profile 60 × 40 SeamLock” post
A rectangular fence post made without welding - the edges are joined by a folded SEAMLOCK seam. We were the first in Lithuania to make posts this way.
- No welded seam A folded seam does not damage the zinc layer.
- 10-15% stronger According to the manufacturer, the seam raises the load capacity.
- Seven standard heights From 1.5 to 3.0 m - to suit the fence height and the concreting depth.
- I-V 08:00-17:00
- we reply within 24 hours
- Made in Lithuania
Technical data
Cannot find the size you need? Call - we will tell you straight away.
- Cross-section
- 60 × 40 mm
- Wall thickness
- 0,9-1,5 mm
- Standard lengths
- 1 500 · 1 700 · 2 000 · 2 300 · 2 500 · 2 700 · 3 000 mm
- Material
- Galvanised or polyester-coated steel strip
- Joint
- SEAMLOCK - no welding
Frequently asked questions
How is SEAMLOCK better than a welded post?
Welding burns away the zinc layer, so the seam becomes the weakest point - and that is where rust starts. The SEAMLOCK seam is folded cold and the coating stays intact. According to the manufacturer, such a seam also raises the load capacity of the post by 10-15%.
What post height should I choose?
Add the concreting depth to the fence height - usually about 0.8-1.0 m, depending on the ground. For a 1.50 m fence a 2.30 m post is the usual choice. We agree the exact height when preparing the list.
Do fixings from other suppliers fit?
Yes. The post shape is compatible with most fixings on the market, so you are not tied to a single supplier.
Need a price for “Profile 60 × 40 SeamLock” post?
Send the fence dimensions or just call - we prepare a specification with quantities within a day.
Quote
Write to us - we will call you back
Name, phone and what you need. We reply within 24 hours, I-V 08:00-17:00. If it is urgent, call.
