PD510 Nano

A standing-seam panel with a fine micro-rib pattern. From a distance the roof looks almost flat, while up close the ribbing scatters light and hides the natural waviness of steel.

A fine ribbing It hides waviness but looks like a flat roof from a distance.
Trimmed edges Supplied only with trimmed edges - laid from a starter strip.
Manufacturer warranty Up to 50 years with PURMAT and PURLAK coatings.

I-V 08:00-17:00
we reply within 24 hours
Made in Poland
Delivery to Lithuania in 1-3 weeks

Technical data

Cannot find the size you need? Call - we will tell you straight away.

Effective width: 510 mm
Seam height: 25 mm
Sheet thickness: 0.50 mm (with the PS25 coating also 0.70 mm)
Material: S250GD + Z200 or Z275
Minimum sheet length: 500 mm
Max. recommended length: 9 000 mm
Minimum roof pitch: 8° (14 %)

Coatings and warranties

Warranty length and colour choice depend on the coating, not the steel. Colour on screen is always approximate - we will send a sample before you order.

Coating shade can vary slightly between raw-material batches. If you are adding to an existing order or need an exact shade - tell us when you order.

PURMAT

polyurethane, matt

50 years technical warranty

Aesthetic 30 m. · Thickness 50 µm
- Corrosion resistance Corrosion resistance: high, 4 out of 4
- UV resistance UV resistance: high, 4 out of 4
- Flexibility Flexibility: high, 3 out of 4
6 colours
- Brick RR 750
- Green RR 011
- Cherry RR 028
- Brown RAL 8017
- Black RR 033
- Anthracite RAL 7016
PURLAK

polyurethane, gloss

50 years technical warranty

Aesthetic 30 m. · Thickness 50 µm
- Corrosion resistance Corrosion resistance: high, 4 out of 4
- UV resistance UV resistance: high, 3 out of 4
- Flexibility Flexibility: high, 3 out of 4
2 colours
- Anthracite RAL 7016
- Black RAL 9005
TOPMAT®

polyester, matt

35 years technical warranty

Aesthetic 20 m. · Thickness 35 µm
- Corrosion resistance Corrosion resistance: high, 4 out of 4
- UV resistance UV resistance: high, 4 out of 4
- Flexibility Flexibility: high, 4 out of 4
6 colours
- Brick RR 750
- Brown RAL 8017
- Anthracite RAL 7016
- Black RR 033
- Graphite RAL 7024
- Light grey RAL 7042
ULTRAMAT®

polyester, matt

35 years technical warranty

Aesthetic 15 m. · Thickness 35 µm
- Corrosion resistance Corrosion resistance: high, 3 out of 4
- UV resistance UV resistance: good, 2 out of 4
- Flexibility Flexibility: good, 2 out of 4
7 colours
- Green RR 011
- Brick RR 750
- Cherry RR 028
- Dark brown RR 032
- Brown RAL 8017
- Anthracite RAL 7016
- Black RR 033
PS25

polyester, gloss

30 years technical warranty

Aesthetic 10 m. · Thickness 25 µm
- Corrosion resistance Corrosion resistance: high, 3 out of 4
- UV resistance UV resistance: good, 2 out of 4
- Flexibility Flexibility: good, 2 out of 4
for 0.50 mm sheet 21 colours
- Snow white RAL 9010
- White RAL 9002
- Grey RAL 7035
- Silver metallic RAL 9007
- Light grey RAL 7000
- Graphite RAL 7024
- Anthracite RAL 7016
- Silver RAL 9006
- Blue RAL 5010
- Green RAL 6029
- Dark green RAL 6005
- Yellow RAL 1021
- Sand RAL 1002
- Brick RAL 8004
- Coral RAL 3016
- Bordeaux RAL 3005
- Cherry RR 028
- Brown RAL 8017
- Dark brown RR 032
- Black RAL 9005
- Cream RAL 1015
for 0.70 mm sheet 12 colours
- Snow white RAL 9010
- White RAL 9002
- Grey RAL 7035
- Silver metallic RAL 9007
- Anthracite RAL 7016
- Silver RAL 9006
- Blue RAL 5010
- Green RAL 6029
- Sand RAL 1002
- Coral RAL 3016
- Red-brown RAL 3011
- Brown RAL 8017
Other colours - on request.

Frequently asked questions

How does Nano differ from the other PD510 panels?

By the surface. Nano has a dense fine ribbing, F-S much wider waves, T-S three ribs, and P-S is plain. Nano is the compromise: from a distance it looks almost like a plain panel, but waviness is practically invisible.

What do “cut edges” mean?

The panel edges are trimmed on both sides, so laying can start from either edge of the slope and the panel is fitted onto a starter strip. Nano is supplied in this finish only.

Which sheet thickness should I choose?

The standard is 0.50 mm, and it is made in every coating. The thicker 0.70 mm sheet stays flatter, so it suits long slopes and plain-surface panels, where waviness shows most. Note: 0.70 mm is made only with the PS25 coating and a narrower colour palette.

From what pitch can it be installed?

From 8° (14%). Standing-seam roofing suits places already too shallow for a tile profile.

Can I get a colour sample?

Yes. We send a sample by post or show it in person - on screen a colour always looks different from coated steel.