T155 trapezoidal profile
T155 - a 154 mm high trapezoidal profile for structures. Intended for load-bearing decks and floors: the higher the wave, the longer the span the sheet covers without extra supports.
- 154 mm wave The higher the profile, the longer the possible span.
- Up to 12 000 long We cut to size - fewer cross joints.
- Load-bearing deck Steel grade S320GD / S350GD - chosen to suit the loads.
- I-V 08:00-17:00
- we reply within 24 hours
- Made in Poland
- Delivery to Lithuania in 1-3 weeks
Technical data
Cannot find the size you need? Call - we will tell you straight away.
- Profile height
- 154 mm
- Coil width
- 1 500 mm
- Effective width
- 840 mm
- Overall width
- 861 mm
- Steel grade
- S320GD / S350GD
- Sheet thickness
- 0,70-1,50 mm
- Max. recommended length
- 12 000 / 14 000 mm
- Minimum sheet length
- 2 000 mm
Profile cross-section
Coatings and warranties
Warranty length and colour choice depend on the coating, not the steel. Colour on screen is always approximate - we will send a sample before you order.
Coating shade can vary slightly between raw-material batches. If you are adding to an existing order or need an exact shade - tell us when you order.
-
PS25
polyester, gloss
30 years technical warranty
Aesthetic 10 m. · Thickness 25 µm
- Corrosion resistance Corrosion resistance: high, 3 out of 4
- UV resistance UV resistance: good, 2 out of 4
- Flexibility Flexibility: good, 2 out of 4
1 colour
- Snow white RAL 9010
A non-standard coating - the sales team confirms availability before you order.
-
PS15
polyester, gloss
Thickness 15 µm
The standard coating for structural profiles
1 colour
- Snow white RAL 9010
-
Galvanised (OC)
unpainted, zinc layer
Farm buildings, structures, temporary roofs
1 colour
- Galvanised OC
Galvanised and aluzinc sheets must stay dry in transport and storage - once damp they quickly develop white corrosion.
Frequently asked questions
How do I choose the wave height?
The higher the wave, the stiffer the sheet and the longer the distance it spans between supports. The T155 wave is 154 mm. Low profiles are chosen for facades and small roofs, high ones where supports are far apart or loads are heavy.
How is the steel grade chosen?
By the loads. S320GD / S350GD - the higher the number, the stronger the steel. Send us the span and the loads and we will tell you which grade and thickness of sheet is needed.
Can I get a colour sample?
Yes. We send a sample by post or show it in person - on screen a colour always looks different from coated steel.
Need a price for T155 trapezoidal profile?
Send the dimensions or just call - we prepare a specification with quantities within a day.
Quote
Write to us - we will call you back
Name, phone and what you need. We reply within 24 hours, I-V 08:00-17:00. If it is urgent, call.
Other profiles in this group
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
