PS panel - facade panels

PS panel

A steel facade panel resembling siding, only made from coated galvanised steel. Three widths and sheets up to 8 m long, so the facade pattern can run from dense to calm. Fitted horizontally, vertically or diagonally.

  • Three widths 155, 215 or 315 mm - from a dense to a calm pattern.
  • Up to 8 m long A continuous wall with no cross joints.
  • More durable than plastic It does not yellow in the sun or turn brittle in the cold.
  • I-V 08:00-17:00
  • we reply within 24 hours
  • Made in Poland
  • Delivery to Lithuania in 1-3 weeks

Technical data

Cannot find the size you need? Call - we will tell you straight away.

Effective width
155, 215 arba 315 mm
Sheet thickness
0.50-0.70 mm (315 mm width - 0.70 only)
Minimum length
800 mm
Maximum length
8 000 mm
Installation
Horizontally, vertically or diagonally
Substrate
Cassettes, timber or steel battens

Profile cross-section

PS panel - cross-section with dimensions
Dimensions in millimetres, from the manufacturer’s catalogue. Labels on the drawing are in Lithuanian, as in the catalogue.

Coatings and warranties

Warranty length and colour choice depend on the coating, not the steel. Colour on screen is always approximate - we will send a sample before you order.

Coating shade can vary slightly between raw-material batches. If you are adding to an existing order or need an exact shade - tell us when you order.

  • PURMAT

    polyurethane, matt

    50 years technical warranty

    Aesthetic 30 m. · Thickness 50 µm

    • Corrosion resistance Corrosion resistance: high, 4 out of 4
    • UV resistance UV resistance: high, 4 out of 4
    • Flexibility Flexibility: high, 3 out of 4

    6 colours

    • Brick RR 750
    • Green RR 011
    • Cherry RR 028
    • Brown RAL 8017
    • Black RR 033
    • Anthracite RAL 7016
  • PMG35®

    coarse-grain polyester, matt

    35 years technical warranty

    Aesthetic 15 m. · Thickness 35 µm

    • Corrosion resistance Corrosion resistance: high, 3 out of 4
    • UV resistance UV resistance: good, 2 out of 4
    • Flexibility Flexibility: good, 2 out of 4

    7 colours

    • Green RR 011
    • Brick RR 750
    • Cherry RR 028
    • Dark brown RR 032
    • Brown RAL 8017
    • Anthracite RAL 7016
    • Black RR 033
  • PS25

    polyester, gloss

    30 years technical warranty

    Aesthetic 10 m. · Thickness 25 µm

    • Corrosion resistance Corrosion resistance: high, 3 out of 4
    • UV resistance UV resistance: good, 2 out of 4
    • Flexibility Flexibility: good, 2 out of 4

    for 0.50 mm sheet 21 colours

    • Snow white RAL 9010
    • White RAL 9002
    • Grey RAL 7035
    • Silver metallic RAL 9007
    • Light grey RAL 7000
    • Graphite RAL 7024
    • Anthracite RAL 7016
    • Silver RAL 9006
    • Blue RAL 5010
    • Green RAL 6029
    • Dark green RAL 6005
    • Yellow RAL 1021
    • Sand RAL 1002
    • Brick RAL 8004
    • Coral RAL 3016
    • Bordeaux RAL 3005
    • Cherry RR 028
    • Brown RAL 8017
    • Dark brown RR 032
    • Black RAL 9005
    • Cream RAL 1015

    for 0.70 mm sheet 12 colours

    • Snow white RAL 9010
    • White RAL 9002
    • Grey RAL 7035
    • Silver metallic RAL 9007
    • Anthracite RAL 7016
    • Silver RAL 9006
    • Blue RAL 5010
    • Green RAL 6029
    • Sand RAL 1002
    • Coral RAL 3016
    • Red-brown RAL 3011
    • Brown RAL 8017

    Other colours - on request.

Frequently asked questions

Which width should I choose?

The width sets the rhythm of the facade. 155 mm gives a dense, fine pattern and looks good on small surfaces. 315 mm is the calmest and suits large walls. 215 mm is the middle ground and the most common choice.

Does the 315 mm width have the same colour choice?

The 315 mm panel is made only from 0.70 mm sheet, and 0.70 mm sheet is coated in a narrower palette - you can see this in the colour table under the PS25 coating. So choosing 315 mm means fewer colours than with the narrower panels. We confirm the exact combination before you order.

Can it be fitted vertically?

Yes. The PS panel is fitted horizontally, vertically or diagonally - that is one of its main advantages. The direction changes the character of the facade without changing a single other detail.

Can I get a colour sample?

Yes. We send a sample by post or show it in person - on screen a colour always looks different from coated steel.

Need a price for PS panel?

Send the facade dimensions or just call - we prepare a specification with quantities within a day.

Quote

Write to us - we will call you back

Name, phone and what you need. We reply within 24 hours, I-V 08:00-17:00. If it is urgent, call.

Product PS panel

+370 630 06606