Galvanised flat sheet 1250×2000
The cheapest option: an unpainted sheet protected by a zinc or aluzinc layer. Chosen where colour does not matter but price and basic corrosion protection do.
- The same steel as the roof Folded from the same coated strip, so the shade matches.
- A standard 2 m piece We make shorter pieces from 0.5 m.
- Custom pieces made to drawing Up to 7 m long and from sheet up to 3.0 mm thick.
- I-V 08:00-17:00
- we reply within 24 hours
- Made in Poland
- Delivery to Lithuania in 1-3 weeks
Technical data
Cannot find the size you need? Call - we will tell you straight away.
- Sheet size
- 1 250 × 2 000 mm
- Sheet thickness
- From 0.50 to 1.50 mm (thicker to order)
Coatings and warranties
Warranty length and colour choice depend on the coating, not the steel. Colour on screen is always approximate - we will send a sample before you order.
Coating shade can vary slightly between raw-material batches. If you are adding to an existing order or need an exact shade - tell us when you order.
-
Galvanised (OC)
unpainted, zinc layer
Farm buildings, structures, temporary roofs
1 colour
- Galvanised OC
Galvanised and aluzinc sheets must stay dry in transport and storage - once damp they quickly develop white corrosion.
-
Aluzinc (AZ)
aluminium-zinc alloy, unpainted
When you need more than zinc, but unpainted
1 colour
- Aluzinc AZ
Frequently asked questions
Will flashing colour really match the roof sheet?
It will, if ordered together with the roof. The manufacturer guarantees a single shade within one order, and between different batches the paint shade can differ slightly - that is the nature of the coating process. So we calculate the flashings together with the roofing, and if you order more later, do say it is a continuation of an earlier order.
How many flashings are needed?
It is calculated from the edge length, with an allowance added for the joints - usually about 10%. Send us the roof dimensions or a drawing and we will prepare a list with quantities.
Can you make a custom flashing?
Yes. To your drawing we fold runs up to 7 m long from sheet up to 3.0 mm thick, as well as industrial flashings for the junctions of large buildings. We can also slit sheet into strips and punch fixing holes. Send us a sketch with dimensions and angles.
Can flashings be had with the nano-WAVE surface?
Yes, and it is new. The nano-WAVE micro-texture scatters reflections and hides small imperfections - which shows most on long runs. If the roofing already has that surface, it is worth choosing the same for the flashings so the trim does not look glossier than the roof.
From what temperature can it be fitted?
The manufacturer recommends no lower than +5 °C. In the cold the coating becomes more brittle, and sealing tapes and silicone stop bonding.
Need a price for Galvanised flat sheet 1250×2000?
Send the dimensions or just call - we prepare a specification with quantities within a day.
Quote
Write to us - we will call you back
Name, phone and what you need. We reply within 24 hours, I-V 08:00-17:00. If it is urgent, call.
