J profile
A J-shaped strip for slotting soffit panels into place. Also used to fix the lower trims of NIAGARA gutters - both round and square - and when installing trapezoidal sheets.
- The same steel as the roof Folded from the same coated strip, so the shade matches.
- A standard 2 m piece We make shorter pieces from 0.5 m.
- Custom pieces made to drawing Up to 7 m long and from sheet up to 3.0 mm thick.
- I-V 08:00-17:00
- we reply within 24 hours
- Made in Poland
- Delivery to Lithuania in 1-3 weeks
Technical data
Cannot find the size you need? Call - we will tell you straight away.
- Developed width
- 25 + 15 + 40 + 10 mm, 14 mm return
- Sheet thickness
- 0,50 mm
- Piece length
- 2 m (shorter available - from 0.5 m)
Profile cross-section
Coatings and warranties
Warranty length and colour choice depend on the coating, not the steel. Colour on screen is always approximate - we will send a sample before you order.
Coating shade can vary slightly between raw-material batches. If you are adding to an existing order or need an exact shade - tell us when you order.
-
PMG35®
coarse-grain polyester, matt
35 years technical warranty
Aesthetic 15 m. · Thickness 35 µm
- Corrosion resistance Corrosion resistance: high, 3 out of 4
- UV resistance UV resistance: good, 2 out of 4
- Flexibility Flexibility: good, 2 out of 4
7 colours
- Green RR 011
- Brick RR 750
- Cherry RR 028
- Dark brown RR 032
- Brown RAL 8017
- Anthracite RAL 7016
- Black RR 033
-
Wood effects
patterned finish
2 colours
- Golden oak Golden Oak
- Dark walnut Dark Walnut
Patterned finishes - the shade on screen is especially unreliable. Always look at a sample before ordering.
Frequently asked questions
What colour should I choose?
The same as the soffit or gutter trim the J profile is fitted against - it should stay unnoticed. That is why it is ordered together with them.
Will flashing colour really match the roof sheet?
It will, if ordered together with the roof. The manufacturer guarantees a single shade within one order, and between different batches the paint shade can differ slightly - that is the nature of the coating process. So we calculate the flashings together with the roofing, and if you order more later, do say it is a continuation of an earlier order.
How many flashings are needed?
It is calculated from the edge length, with an allowance added for the joints - usually about 10%. Send us the roof dimensions or a drawing and we will prepare a list with quantities.
Can you make a custom flashing?
Yes. To your drawing we fold runs up to 7 m long from sheet up to 3.0 mm thick, as well as industrial flashings for the junctions of large buildings. We can also slit sheet into strips and punch fixing holes. Send us a sketch with dimensions and angles.
Can flashings be had with the nano-WAVE surface?
Yes, and it is new. The nano-WAVE micro-texture scatters reflections and hides small imperfections - which shows most on long runs. If the roofing already has that surface, it is worth choosing the same for the flashings so the trim does not look glossier than the roof.
From what temperature can it be fitted?
The manufacturer recommends no lower than +5 °C. In the cold the coating becomes more brittle, and sealing tapes and silicone stop bonding.
Need a price for J profile?
Send the dimensions or just call - we prepare a specification with quantities within a day.
Quote
Write to us - we will call you back
Name, phone and what you need. We reply within 24 hours, I-V 08:00-17:00. If it is urgent, call.
