Facade cassette K2
A facade cassette with a chamfered joint. The bevelled edge softens the shadow between cassettes, so the facade reads more calmly than with a square joint. Dimensions to your design.
- Chamfered joint A bevelled edge - a softer shadow between cassettes.
- Dimensions to the design Width up to 1 000 mm, length up to 2 800 mm.
- Hidden fixing Neither screws nor brackets show on the facade.
- I-V 08:00-17:00
- we reply within 24 hours
- Made in Poland
- Delivery to Lithuania in 1-3 weeks
Technical data
Cannot find the size you need? Call - we will tell you straight away.
- Material
- Steel 1.20-1.50 mm or aluminium 2.00-3.00 mm
- Effective width (A)
- 175-1 000 mm
- Effective length (B)
- 100-2 800 mm
- Horizontal joint (C)
- 0-50 mm
- Cassette depth (E)
- 35-50 mm (steel) / 30-50 mm (aluminium)
- Vertical gap
- 10-30 mm (recommended)
- Fixing
- Concealed, on Omega profiles
Coatings and warranties
Warranty length and colour choice depend on the coating, not the steel. Colour on screen is always approximate - we will send a sample before you order.
Coating shade can vary slightly between raw-material batches. If you are adding to an existing order or need an exact shade - tell us when you order.
-
Polyester
standard paint group
Ordinary facades, the widest colour choice
-
Prism
multi-layer paint system
Rich, deep shade
-
Polyurethane
reinforced paint group
When more UV and corrosion resistance is needed
Frequently asked questions
How does K2 differ from K1?
Only the joint shape. The K2 edge is chamfered, so the joint between cassettes is bevelled and the shadow softer. The K1 edge is folded at a right angle - the joint is crisp and strict. The dimensions, materials and fixing are the same for both.
Are the cassettes made to my dimensions?
Yes, that is the whole principle of this product. You give the width, the length and the joint width, and we make exactly those cassettes. That is why the table shows ranges rather than specific sizes.
What base is required?
The cassettes hang on Omega profiles in the suspension. A vertical gap of 10-30 mm is left between cassettes - it lets air move behind the facade and is at the same time part of the facade pattern.
Steel or aluminium?
Steel ones (1.20-1.50 mm) are more economical and suit most projects. Aluminium ones (2.00-3.00 mm) are lighter and more corrosion resistant, so they are chosen more often on the coast or when the cassettes are very large.
Need a price for Facade cassette K2?
Send the facade dimensions or just call - we prepare a specification with quantities within a day.
Quote
Write to us - we will call you back
Name, phone and what you need. We reply within 24 hours, I-V 08:00-17:00. If it is urgent, call.
